Recent Mold Remediation Posts

Safety Equipment Used to Get Rid of Mold

9/19/2019 (Permalink)

A man wearing yellow headphones for ear protection, goggles and an air-purifying mask The type of face mask or respirator worn will depend on the size of the remediation

Protective Equipment to Remove Mold Damage

You’ve got the black stuff growing in your bathroom and need it gone. Now, people are coming toward you in white, plastic coveralls and wearing face masks. They look like something out of a horror movie. It’s OK, though. They’re getting themselves ready for the mold.
You know the mold remediation specialist and his team are stepping into a potentially dangerous situation that might risk their health. They need to suit up and get protected. What type of protective equipment does a technician need to wear to get rid of the black, nasty stuff?

1. Full-body Suits

For large remediation projects, the Environmental Protection Agency recommends complete coverage of the body. Disposable coveralls protect any exposed skin from coming into contact from mold and mold spores. Full-body suits made from breathable material such as TYVEK ®also prevent the spores from transferring to clothes.

2. Face Masks or Air-purifying Respirators

The type of face mask or respirator worn will depend on the size of the remediation. Technicians will wear an N-95 respirator during a medium mold damage cleanup. These facemasks cover the nose and mouth. A P100 respirator is also known as a powered air-purifying respirator. It covers the full face. Only respirators approved by the National Institute for Occupational Safety and Health are to be worn throughout the remediation process.

3. Gloves

Like face masks and full-body suits, gloves protect the skin from coming into contact with mold. A technician uses long gloves which extend to the middle of the forearm for the best protection. Gloves come into different materials such as natural rubber, neoprene, nitrile, polyurethane and polyvinylchloride (PVC).
All these things are protective equipment a mold remediation technician uses to safely remove mold damage from your home in Ridgeview Park,GA. To keep you and your family healthy from the effects of mold a specialist needs to keep themselves healthy as well.

How To Prevent Mold

7/26/2019 (Permalink)

Moldy basement

Many business owners are aware that water damage can cause mold growth. Sometimes, mold is visible. Other times, it lurks where it cannot be seen. Certain types of mold spores can travel easily through the air, making them difficult to eradicate. If you have experienced unwanted dampness in Lenox Square,GA, there are several things you can do to deter mold from growing.

Where To Focus Your Efforts

Mold can form anywhere there is moisture or where water gathers. To reduce the chance of mold growing in your office or building, focus on the areas that are most likely to get wet:

  • Basements
  • Bathrooms
  • Windowsills
  • Washing machines
  • Kitchens

These areas need to be checked and dried as quickly as possible. Any areas that have experienced water damage should be dried out 24–48 hours from the time of the incident.

Which Prevention Methods Help

There are several methods that can help with mold prevention in high-risk places. If possible, use mold-resistant building materials, which are less hospitable to mold. To inhibit growth, the core of mold-resistant drywall is covered in fiberglass instead of paper. Maintain proper ventilation and appropriate humidity levels throughout your building to help create an environment less hospitable to mold.

How To Dry Wet Areas

If prevention measures fail and areas get wet, there are actions you can take to prevent mold growth. Wet items that can be removed, such as rugs, should be removed and dried as quickly as possible. Flooring, walls and other items that cannot be easily removed can be dried with increased air circulation. Circulation can be increased by opening windows and doors or using a hair dryer. More intense water saturation may need to be dried with professional equipment like commercial drying fans.

The best way to prevent mold is to keep your building dry. However, if areas become wet or moist, small jobs can be taken care of with do-it-yourself methods. When water damage is more severe, it may require the help of professional mold remediation specialists.

The Dos and Don'ts of Insurance Coverage for Mold Growth

5/23/2019 (Permalink)

Water damage can lead to mold

Homeowner's insurance doesn’t provide mold coverage unless it is considered part of a "covered peril." This means your policy probably won't cover fungus growth if it is the result of a preventable water leak or the result of flooding. If your Sandy Springs,GA, home has high levels of humidity and mold appears in the bathroom, your insurance coverage probably won't pay for any necessary repairs.

What are Covered Perils?

  • Damage caused by automobiles and other vehicles
  • Falling objects
  • Fire
  • Frozen pipes
  • Lightning strikes
  • Theft
  • Unintentional discharge or overflow from HVAC, sprinklers, or home appliances
  • Vandalism and other criminal acts
  • Weight of snow and ice

If you can show that mold developed as the result of one of these situations, your existing insurance may pay for the cleanup and repairs.

Examples of When Your Insurance Will Pay

• You have a history of maintaining your roof gutters, keeping them clean and in good repair, but the winter has been harsh, and an ice dam has formed. If water backs up before you can address the ice dam and water leaks into your attic, it may cause fungus growth.

• A similarly well-maintained washer hose behind the washer springs a leak. You stop the rush of water and contact professionals for help, but mold growth occurs before damages occur.

• You are out of town over a single weekend, and a pipe bursts. Many gallons of water fill your basement, soaking into carpeting, furnishings, and the drywall before you return the next day.

Examples of When Your Insurance Will Not Pay

• Winter temperatures caused one of your pipes to burst, but you don't go into the basement much. The water sits there for several weeks before you notice.

• It's been a year or two since you've been on the roof. Missing and damaged shingles let water into the attic. The wood and insulation become moist and mold grows.

When mold affects your home, don't wait to schedule a remediation visit. Cleanup and prevention professionals can help you understand whether you have mold insurance, as well as when and what type of fungus growth falls under that coverage.

What You Should Know About Mold in Air Ducts

4/9/2019 (Permalink)

One of the signs of Mold is a musty odor

As soon as black mold is noticed in a business in Sandy Springs, GA, it’s important to begin the remediation process quickly. However, being unaware that mold can grow in the air ducts in a building can allow the mold to spread and cause extensive damage to your business.

How Does Mold Grow in Ducts?

When thinking of common places mold grows, ducts are commonly not considered. The following factors make mold likely to grow in ducts:

  • Poor air circulation
  • Organic material that mold needs to grow, such as dust and dirt, collects in ducts
  • Problems such as water leaks can easily go unnoticed in ducts, making it easier for mold to grow and spread in these areas

What Are the Signs?

Though there are a variety of molds that can grow in ducts, black mold is particularly common. Signs that your building may have this type of mold growth in ducts can include:

  • An unpleasant, musty odor
  • Discoloration on walls or ceilings that are located near the ducts
  • Visible signs of mold elsewhere in a property, which can indicate that there may be a widespread mold issue in areas that are less visible

How Is Mold Removed From Ducts?

Removing mold from ducts is often done by mold remediation experts who know how to ensure the spores don’t spread. In order to prevent the spores from spreading throughout the property, professionals will make sure the ducts and the areas surrounding the ducts are contained. Items that are covered in mold will be removed from the building to be either replaced or restored. The use of high-powered air filters will also help to remove the harmful spores.

Mold can grow in a variety of places in your business, and having a thorough understanding of mold can be helpful. Knowing how black mold grows in air ducts, the signs of growth and how it is removed can help you take steps toward having clean ducts.

How Do Air Purifiers Remove Mold Spores?

3/4/2019 (Permalink)

If mold is already a problem at a residence in Sandy Springs, GA, contact a mold remediation company.

A variety of air filtration systems can reduce the presence of mold spores in interior air. Though purification systems work in different ways, they each have features that are helpful for preventing mold growth at a residence in Sandy Springs, GA.

Filter Type

Fungus spores range in size from as small as 3 microns to as large as 100 microns. High-Efficiency Particulate Air filters are the most effective, and have several requirements:

  • Remove 99.97 percent of airborne particles
  • Filter particles down to 0.3 microns
  • Labeled "True HEPA" and not "HEPA Type"

As most spores are larger than 2 microns, you may be able to save money by purchasing a HEPA Type filter. These filtration units will not eliminate smaller contaminants.

Room Size

When choosing a purification system, it is also important to factor in the square footage of the space in which you want to filter air. Here are a few guidelines for selecting an air filtration system:

  •  Small room purifiers filter air in spaces up to   about 300 square feet
  •  Medium-to-large room purifiers filter air in   spaces ranging from about 300 to 600   square  feet
  •  Large to extra-large room purifiers filter air   in  spaces up to or over 1,000 square feet

It may be necessary to purchase more than one purifier to use throughout a home. You may also periodically relocate a unit for more thorough filtration results.

Operation and Maintenance

Check to see whether the purifier you are considering contains additional systems. Some units feature antimicrobial treatments or methods for breaking down particles. You should also determine whether a filter can be cleaned and reused or will need to be replaced.

All of these factors impact the ability of an air purifier to filter mold spores. The right air filtration system can improve air quality and limit mold growth. If mold is already a problem at a residence in Sandy Springs, GA, contact a mold remediation company.

Mold Damage Remediation and Restoration in Atlanta

2/18/2019 (Permalink)

Finding hidden mold is our specialty. Call SERVPRO so we can investigate the damage or smell on your property.

Each Surface Type Warrants a Different Approach When it Comes to Mold

Mold can go undetected for days, weeks or even months, depending on where it is hiding. While small amounts of mold spores are everywhere and pose no threat, a large colony can destroy building materials and pose a health threat. 

Restoring property from the effects of mold damage in Atlanta homes requires trained professionals. Every SERVPRO office maintains a crew that is trained to identify mold infestations and determines the best method available to remove or clean it off surfaces. 

We determine the method used to remove mold depending on the type of surface the mold is on. It is simpler to clean nonporous materials. These surfaces include glass, metal, certain kinds of plastics, marble, and smooth stone. We remove dry mold by vacuuming the surfaces with special HEPA filters that catch even a single mold spore. Wet mold is wiped off with a cloth dampened with water. If the mold is growing in a layer of soil, our team members use a detergent solution.

Porous materials with visible mold growth often should be removed from the home and disposed of according to state regulations. These materials include carpets, carpet pads, drywall, and insulation. Technicians can clean fabrics such as upholstery, drapes, and curtains using foam, spray, or immersion techniques depending on the thickness of the mold and the colors used. Before starting with those methods, crew members vacuum the items to remove loose mold fragments. If needed, they agitate the materials to loosen more mold and then vacuum them again. 

Semiporous materials require methods not usable on porous or even nonporous surfaces. The surfaces (wood and concrete) may require sanding, wire brushing, and other abrasive methods. The cleaners we use on these surfaces have abrasive agents mixed in to be certain the agent gets into and agitates cracks and grooves that non-abrasive agents miss. If exposed to mold for too long, the structural integrity of the wood might be compromised by rot. 

Restoring your home after a mold infestation is a long process. SERVPRO of North Atlanta / Buckhead is here to help you through every step. If you need our services or simply want to schedule an inspection to ally concerns, call us at (404) 261-2925. 

Mold in Your Home: Identifying Problems Before a Disaster

1/24/2019 (Permalink)

Leaking utility sink in a Atlanta, GA garage.

How To Identifying A Mold Problems At Home

While high humidity is a contributing factor in most instances of mold growth, fungus thrives on moisture, period. Therefore, even with dehumidifiers, a leak in your wall cavities can lead to mold development. It is true that you can prevent the development of mold colonies, but the idea that you can eliminate every mold spore is a myth. Mold spores are present everywhere, and despite your best efforts, they will find their way into your home. The best you can do is identify potential problems before they become large-scale disasters.

1. Minimize Moisture Buildup

Since mold loves moisture, it is necessary to prevent as much moisture buildup as possible. Invest in dehumidifiers and proper ventilation for areas where it is needed. Your basement and attic are likely target areas, but don’t forget about your kitchen, bathroom and laundry room.

2. Pay Attention to Changing Smells

Mold growth produces a very distinctive smell. It is typically musty, and it is often accompanied by a heaviness, or dampness, in the air. If you notice an odor like this that does not dissipate, then you may have a mold problem that requires an inspection.

3. Maintain Property Maintenance Schedules

Water damage is one of the leading causes of mold development. Therefore, it is essential to keep up with plumbing maintenance. Additionally, you can inspect your doors, windows and roofline to ensure that the areas are all sealed correctly and that no moisture is seeping in from the outside of your home.

4. Resolve Issues Immediately

If you come across water leaks, roof damage or mold, a mold remediation specialist in the Atlanta,GA , area can help. They can offer immediate assistance, which is essential because mold spreads quickly, beginning to grow in as little as 12 to 48 hours and colonizing within 12 days.

Mold growth can lead to expensive repairs. Avoiding major disasters is the best way to avoid costs, which is where due diligence comes into play. If you minimize moisture, focus on odors and maintain proper maintenance schedules, then you can prevent most cases of mold development.

Factors Contributing to Mold Damage in Atlanta

12/26/2018 (Permalink)

Mold and Moisture in Atlanta, Remedied by SERVPRO

When Your Atlanta Home Needs Mold Remediation, Call SERVPRO

After many types of disasters, the threat of mold can quickly become a reality. A major flood is not needed to start the threat, most mold spore and microbe growth begins with a relatively small amount of water and then spreads unnoticed for a long time.

Cleaning or replacing mold damage in Atlanta is not a simple process. SERVPRO has decades of experience with mold and the training to professionally complete the job and place you safely back into your house or apartment. 

There is a mistaken belief that mold growing in your home means you keep a dirty house. This position is not true. Mold spores are in every home and begin to expand no matter which neighborhood you live in with only three factors: food source, temperature, and moisture.

Every home is a food source. Mold grows exceptionally well on building materials such as drywall, insulation, paper, and wood such as framing. If it is organic, mold feeds on it.
Most homes keep an indoor temperature of around 74 to 78 degrees. Most common molds grow in a range from 68 to 86 degrees. Other molds grow well at temperatures lower or hotter than that.
Mold spores must have much moisture to expand and begin developing. They grow quickly at levels over 70 percent, but some can survive at levels of 65 percent. The ideal way to stop mold growth is to keep the moisture level under 60 percent. Since moisture is the easiest to manipulate than temperature and food source, this is where our technicians concentrate their efforts.

Time is a major factor in how our technicians remove mold. Water does not need to be contaminated; microbes are present even in clean water pooling under a dripping faucet. After just a few days, though, the growing mold quickly becomes the contamination, turning the water 'gray.' Where clean water can be pumped out of a home and into a nearby sewer; contaminated water may have to be captured and disposed of differently according to state and federal EPA rules.

Stopping mold is a major issue in protecting your home and property. SERVPRO of North Atlanta / Buckhead is ready to explain every action as we help you. If you have seen or otherwise believe you have a mold problem, call at (404) 261-2925 today.

"Do Air Purifiers Remove Mold?

9/18/2018 (Permalink)

Mold damage equipment in Atlanta, GA

Do Air Purifiers Remove Mold?

Mold infamously reproduces by traveling through the air and finding a damp area to grow and spread. It makes sense that air purifiers can prevent mold from spreading in your home, but do they really work? This informative article can give you a better idea concerning mold removal and whether air filtration can work for you.

What Air Purifiers Do

A purifier removes contaminants from the air, such as dust and pollen. This can be helpful for people with allergies or asthma. Luckily there are specific purifiers that can remove mold from the air. These machines have HEPA filters.

HEPA stands for High-Efficiency Particulate Air and is designed to trap airborne particles that are 0.3 microns or larger. This type of air filtration is recommended by most health agencies such as the EPA and the American Lung Association.

Why They Are Useful

Most mold spores span 1-30 microns, which means that the HEPA filter can remove the spores from the air. By using a purifier, you can prevent spores from spreading or contaminating other parts of your home in Atlanta,GA. It can also protect you and your family members from inhaling any spores.

When Professional Help May Be Needed

You can prevent mold from spreading, but what happens when mold has already spread throughout your home? This might require the help of mold removal specialists. Here are some reasons you should consider doing more than just purchasing an air purifier:

  • The mold may already be spreading
  • Spores may be embedded in furniture and other porous objects
  • Leaks or condensation may be a big issue in your home

If these problems are familiar to your house, then you should seek expert advice and help. Complete removal of all mold is important.

Air filtration can help prevent mold if you use a purifier that uses HEPA filters. Doing this can stop the spreading of airborne mold spores, but you might need professional help to remove past or current mold growth.

Combatting Mold: The Best Purifiers for Mold Reduction

5/14/2018 (Permalink)

If you are concerned about airborne mold, a purifier is a good investment.

Combatting Mold: The Best Purifiers for Mold Reduction

No matter how clean an environment is, mold spores are in the air. Your home in Atlanta, GA, is no exception. You can, however, use an air filtration system to help minimize the amount of mold in the air and help keep it from settling and growing. When you are choosing an air purifier, you want to make sure that it can trap mold without multiplying it. For this, you probably need a High Efficiency Particle Air filter.

HEPA Filters

HEPA filters have a few advantages over other filters on the market:

• They pick up smaller airborne particles, such as mold spores.
• They deny mold the moist environment it needs to survive.
• They remove 30 to 40 percent more particles from the air than other filters do.

When spores enter the HEPA filter, they tend to dry out and die from lack of moisture. If you use an activated carbon filter in your air filtration device, you can even eliminate most of the musty odor caused by excessive mold in the air.

Top Purifiers

The best purifiers, of course, are the ones used by mold remediation specialists. Those machines are probably too expensive to be practical for an in-home model. A good air purifier for your home can cost anywhere from $200 to $1500 and above. Fortunately, some of the ones with the highest ratings fall toward the lower end of the price range:

• Oransi Max - $479
• BlueAir 450E - $629
• OV200 Air Purifier - $329

Most of the purifiers use both a pre-filter and a HEPA filter. They can run all day and all night, giving you cleaner air around the clock. If you live in a particularly damp environment, it is a good idea to add an antimicrobial filter to the system as well.

If you are concerned about airborne mold, a purifier is a good investment. No matter what your air filtration needs may be, a top-rated purifier with a HEPA filter is your best bet. For more information, visit http://www.SERVPROnorthatlantabuckhead.com/.

3 Reasons Why Your Commercial Building Needs Professional Mold Intervention

4/26/2018 (Permalink)

When it comes to maintaining the cleanliness of your Atlanta, GA, commercial building, there are many chores you can perform yourself. Sweeping, mopping and wiping down employee bathrooms are all manageable tasks; however, if you encounter mold on your property, its removal is not a job you want to handle on your own. Fungus cleanup is best left to a qualified mold mitigation and remediation service, which can offer several benefits for the condition of your building.

1. Mold Is Not a Surface Fungus

Unlike mildew, mold cannot simply be wiped away with a cloth and a household cleanser. Once mold spores take hold on a food source, they tend to grow roots deep into the surface. While spot cleaning mold with bleach may make it appear cleaned up, the roots remain and allow it to grow back within a day or two afterward. In addition, the water contained in many bleach products may only contribute to further mold development.

2. Mold Spores Can Spread if Not Contained

Attempting mold cleanup on your own may make the problem worse because disturbed patches of fungus tend to release spores that can travel throughout your building to settle and grow elsewhere. The spread of these spores can happen quickly, especially if they find their way into your ventilation system. Remediation technicians can use containment systems as they employ a cleanup mold process to reduce the risk of further contamination.

3. The Cause Must Be Addressed

Fungus cleanup is only one factor in battling an infestation. Unless the cause of the growth is addressed, you may find that mold returns repeatedly, which can cause long-term damage to your building. Expert mold techs can discover the source of the problem, whether it is a hidden plumbing leak or excess moisture buildup behind your walls, and resolve the issue so mold does not grow back.

Eradicating mold at your Atlanta, GA, business requires professional intervention. Leaving fungus cleanup to the experts can prevent it from returning, no matter where it hides. For more information, visit http://www.SERVPROnorthatlantabuckhead.com.

Managing Mold Damage In Your Sandy Springs Laundry Room

3/30/2018 (Permalink)

Musty Smell from Mold? Call SERVPRO in Sandy Springs

SERVPRO's Sandy Springs Remediation Can Eliminate Mold Problems

No one wants mold damage anywhere in their home, but the laundry room is a common and frustrating area where it makes itself known. You try to remove the mold yourself without success and finally ask, "what company near me holds the key to complete mold remediation?" The answer is SERVPRO, your local mold management and remediation experts.
 
It is not surprising that mold damage plagues your Sandy Springs laundry room. Plenty of organic material and a wide range of microbial accelerants lie in your laundry basket. The area is isolated, in an out of the way corner of your basement or lower level, where you are a bit lax with daily cleaning. Your washer itself is a treasure trove of nooks and crannies that hide mold growth. You sniff the musty odor every time you open the washer or dryer doors, and the clothes you hang and fold sadly hold that funky smell right into your family’s dresser drawers and closet.
 
Dealing with persistent mold is not a do it yourself job. All your efforts fail because mold is a tricky problem that requires remediation experts from SERVPRO to conquer. When we arrive expect a thorough inspection of the laundry area to isolate any mold colonies behind or under the washer or dryer. Storage units and laundry chutes will be tested for mold activity. Hoses and other plumbing connections will be examined for leaks and evidence of mold growth.
 
The washer and dryer themselves are possibly a source of mold contamination. Our staff looks for visible mold on seals and doors and pulls out traps and drains to seek hidden patches of mold or mildew. Fungi found may be scrubbed off solid surfaces. If hoses and seals are the problems, a referral to an appliance repair specialist makes sense. Hoses, traps, drains, and seals removed and replaced eliminate the source of the mold. Disinfection with appropriate SERVPRO products on non-porous surfaces followed up with liquid or fogging deodorizers move your laundry room back to fresh-smelling instead of odor-creating.
 
Rather than discarding and replacing moldy appliances and walls, consider contacting SERVPRO of North Atlanta / Buckhead for a laundry room mold remediation. Call our friendly staff at (404) 261-2925 to set up a consultation.

6 Tips for Getting Rid of Mildew on Plants

3/26/2018 (Permalink)

Did you know some of your house plants could be susceptible to plant mildew? If you notice this growth in your Atlanta, GA home, you likely want to get rid of it as soon as possible. If left untreated, the mildew could lead to the death of the plant.

1. Don't use mildew cleaning products. Most cleaning products on the market are designed to get mildew off of building surfaces. If you use this type of cleaner on your plants, you may end up doing more harm than good. You should only use a cleaner if it is specifically designed for plant mildew.
2. Prune the covered areas. Removing the leaves covered in mildew is an important step in getting the infection off your plants. If the mildew growth covers most of the greenery, it may not survive the necessary pruning.
3. Move it outdoors. If you have an indoor plant, take it outside to give it a chance to reach a normal humidity level. If it's already outside, you may want to try to move the plant into direct sunlight if possible.
4. Wash away the mildew. Use plain water to remove the growth, but be careful not to give the plant too much water this way. When you do water your plants, you should try to put the water directly at the roots instead of allowing it to flow over the leaves.
5. Put it in sunlight. Direct sunlight can help dry the plant faster. This removes the moist environment mildew needs to thrive.
6. Use mildew-resistant potting soil. Once you have your mildew problem under control, you want to prevent it from coming back. Introducing a mildew-resistant potting soil can help decrease your chances of seeing this growth again.

At first, plant mildew may not seem as worrisome as mold on your house. However, your mold remediation experts may encourage you to act quickly on its removal. Visit http://www.SERVPROnorthatlantabuckhead.com for more information on mold. 

Could Mold Be Growing in Air Ducts?

2/20/2018 (Permalink)

The fact is air ducts are a great environment for the growth of mold, mildew and other fungi. Mold can grow anywhere there is extra moisture, and your building's heating and cooling system creates moisture in the ducts. Regular HVAC cleaning, including the cleaning of vents, may be able to help stop this growth. Working with professionals experienced with the removal of mold can make the cleaning process even more beneficial.

Discourage Growth by Dusting

Seeing built up dust around vents and ducts is no new sight. However, it should be something you're concerned about. Dust can actually help trap moisture in your ducts, which can lead to the growth of mold. The dust can even act as a surface for the fungus to sprout and grow. When you clean the dust out, you remove the habitat.

Test Your System to Learn More

Just because mold can grow in different parts of your HVAC system doesn't mean that you currently have that problem. Typically, when you have a fungus issue you'll be able to spot the problem in a few ways:

• You see mold growing on surfaces.
• You smell mildew in the air.
• You notice extra moisture around vents.

If you don't notice any of these issues, chances are you don't have a problem to worry about. You can really test your HVAC system by turning it off for several minutes. When you turn it back on, try to compare the air's smell. If you notice stronger scents of mildew with your HVAC running, it could be a sign you need to call in a professional for an HVAC cleaning and mold removal.

Regularly cleaning vents and air ducts on your own may be enough to keep the growth of mold at bay. However, getting a professional HVAC cleaning in Buckhead, Georgia, can you give you more peace of mind that your business doesn't have any unwanted patrons swarming through the air.

For more on mold visit us at http://www.SERVPROnorthatlantabuckhead.com.

Top Reasons You Have Mold in Your Home

12/2/2017 (Permalink)

Top Reasons You Have Mold in Your Home

There is always talk about how dangerous mold is and how you should ensure you do not have it in your home, especially black mold. Doing a check of your home on a regular basis is important to spot any black mold issues and to get mold cleanup started right away. However, the key to really ensuring you do not get mold in your Atlanta, GA  home is knowing why mold grows in the first place.

The main instigator for mold is moisture. In a home, there are plenty of sources that can create a moisture problem. Some common issues include:

High humidity
Broken pipes
Flooding

If you have any of these issues, it is essential to address them right away and get rid of the excess moisture before black mold even has a chance to begin growing.

High Humidity

High humidity is typically a weather or season issue. You can take steps to reduce the humidity in your home. Using an air conditioning unit will remove excess moisture in the air and reduce your homes humidity. In areas that tend to attract moisture, such as attics or basements, you may want to run a dehumidifier.

Broken Pipes

If you have a plumbing issue, you should get it fixed asap. You also need to check for water leaks to ensure the plumbing issue did not lead to water getting in your walls, floors or ceilings. If water did leak out, then you should clean it up immediately. Never let water sit too long.

Flooding

If you experience flooding in your Atlanta, GA home, you should take steps to stop it from occurring again, if possible. Anything that was damaged from the flood waters should be removed, such as bedding, drywall or furniture.

Your best bet when tackling mold is to call in professional help. You can find mold removal professionals or others who can assist you with your moisture issues and ensure mold is not growing in your home.
Visit http://www.SERVPROnorthatlantabuckhead.com for more information on mold.

4 Tips for Containing Mold Damage in Your Home

12/2/2017 (Permalink)

4 Tips for Containing Mold Damage in Your Home

Any time there is standing water in your Atlanta, GA home from incidents like a leak or a flood, mold almost immediately follows. Within 48 hours of the water issue, mold can grow and spread throughout your home, causing damage and structural issues. Take advantage of these tips to keep black mold out of your home while you wait for the professionals to arrive.

1. Restrict Airflow in Your Home

Mold spores spread more rapidly when they are blown around by fans or air conditioners. They can also get sucked into your HVAC system and cause an infestation you are unaware of. Turn off your HVAC system and all fans. Resist the urge to point a fan at wet carpet or flooring.

2. Shut off the Water

If you have a leaky water pipe or sewage system, turn your water off immediately after locating the leakage point. This will prohibit any further damage to your home and make the mold cleanup process easier. Any time there is a moisture problem, it is best to keep the water off until the issue is resolved.

3. Vacate Your Home

When possible and especially in cases of an extreme water problem, it can be best to stay somewhere else while your home is recovered.

4. Don’t Move or Touch Anything With Mold

Even small spots of mold can be extremely dangerous. Rather than trying to handle it yourself and unintentionally spreading mold spores or making yourself sick, call mold removal professionals. They are experienced and have the proper training, equipment and protective gear to make sure the mold is entirely eradicated without injury.

Water problems in your Atlanta, GA home can lead to an even bigger black mold infestation unless you react quickly. Stay safe by not allowing the mold to spread and calling the right experts for help.
Visit http://www.SERVPROnorthatlantabuckhead.com for more information on mold.

Dealing with Mold Damage in Atlanta

9/26/2017 (Permalink)

Mold is something no one wants to have to deal with. It is important to understand that hiring the right professional is critical when discovering any types of microbial growth in your home or business. 

The first step when microbial growth is discovered is to have an environmental hygienist do a test to determine what kind of growth it is. Once it is determined there will be a written protocol on how to treat and remove the growth. 

It is important to not create further spread of mold spores when discovering mold by immediately cutting into structures and discarding. In most cases, containment will have to be set up to prevent further spread of mold spores. 

If you have any questions about mold remediation in Atlanta or the Buckhead area, feel free to reach out to us at anytime at (404) 261-2925

What to do if you find mold in your home?

9/26/2017 (Permalink)

Finding mold in your home can be a stressful situation. We want to make sure you know what to do and how to handle it. First if you have any questions feel free to call us at anytime at (404) 261-2925.

If you discover mold or any kind of microbial growth growing in your home, it is important to get a hygienist to test the substance. Once the growth is determined the proper recommendations can be written for how to remove and treat. It is very important to make sure each step is taken into account. This way the job can be completed and not have to be redone for a second time. 

Overall if you need more insight on mold remediation, visit our website at http://www.SERVPROnorthatlantabuckhead.com/mold-remediation

Overcoming Mold Damage: What Everyone Needs to Know

8/31/2017 (Permalink)

Mold shows up after there has been water damage. It could be as a result of a flood, a pipe break, or some other causes of water inside of a home or business. Exploring mold remediation will make it easier to overcome the problem.

Why is mold bad?
Mold is a type of fungus. It is more severe than mildew. Black mold is considered one of the worst types of fungus because of the way it spreads very quickly and is notorious for structural damage.

Mold damage needs to be addressed quickly because it can lead to dry rot and all sorts of other problems. Additionally, if there is mold growth behind a wall, there's often no way to know about it. The mold growth behind a wall could be black mold and could also be causing dry rot. Until it starts to decompose wood or cause a smelly odor, it's hard to know that it's there. It's why it's important to call a restoration company the moment that it's suspected that there is any kind of mold growth.

Mold mitigation needs to occur right away so that mold doesn't get to become overly problematic.

What can be done about mold?
Residential and commercial mold damage isn't the end of the world. The good news is that through mold mitigation and mold remediation, the problem can be taken care of. All mold can be eliminated from a building.

Will mold spread?
Mold will often spread during the mold removal process. It's important to remember that it's a fungus, and fungus grows as a result of spores. It's not uncommon for spores to spread, and this is done because the spores become airborne. If there is mold growth behind a wall and someone rips into the wall, the residential or commercial mold damage could become a lot worse.

DIY mold removal is never recommended because most people don't know about mitigation or remediation. It's important to contain the black mold or any other mold growth to one area. otherwise, the mold in a home or the commercial mold damage is going to be that much worse. The smelly odor will spread and it will require a lot more deodorization.

It is the mold growth that will lead to dry rot, a smelly odor, and the need for professional mold removal. It's also important to know if there is black mold in the home or business because the removal process is different.

Visit http://www.SERVPROnorthatlantabuckhead.com for more information on mold.